[DGX-S] - J-Runner

Buon giorno,

Avete un manuale su come usare il DGX con J-Runner?

Ho bisogno di una guida da quando avete ottenuto il vostro CPU / DVD con il tasto DGX.

Se possibile, qualcuno può aiutare?

Grazie!

Please, speak English, we can understand better in English rather than an Italian traduction by Google Translator... :)

Have you already read Pusher's (or Raiden's English version) DGX tutorial?

[url]http://www.consoleopen.com/forum/tutorial-base-per-installazione-dellrgh/9535-tutorial-cpu-key-recovery-team-xecuter-dgx-english.html[/url]

Thanks :)

I am just trying to be respectfull as this Forum is not English based.

I did read the manual but one thing that is unclear to me is it only tells you to flash it with the DGX ECC, then only to recover your CPU key "Wich I guess that the DGX is pre-flashed" so you don't flash that NAND to the DGX.

I would like to know what is left for next.

Let me explain how I see it.

First get the NAND backup, then install the DGX, Get your Keys and then I am lost :)

Could you assist?

Thanks

If you guys needed the revised ECC file for Corona 4GB please find the link below.

[URL="https://dl.dropbox.com/u/33453664/CORONA_4GB_DGXv2.ecc"]https://dl.dropbox.com/u/33453664/CORONA_4GB_DGXv2.ecc[/URL]

The Orignal Poster Was Martin C from TX Forums.

[URL="http://team-xecuter.com/forums/showpost.php?p=701281&postcount=2"]http://team-xecuter.com/forums/showpost.php?p=701281&postcount=2[/URL]

Yes, it's easy. Now that you have the cpu key, you can desolder the DGX and install your favorite glitchip. With the initial dump and the cpu key just recovered thanks to the DGX, you can create and then write (with your spi flasher or SD/eMMC R/W tool) the freeboot.

Citazione:

---

Originariamente Scritto da GoRo2010

If you guys needed the revised ECC file for Corona 4GB please find the link below.

[URL="https://dl.dropbox.com/u/33453664/CORONA_4GB_DGXv2.ecc"]https://dl.dropbox.com/u/33453664/CORONA_4GB_DGXv2.ecc[/URL]

---

What is it?

If you have syntoms like below, you can try the new ECC for the Corona 4GB

Citazione:

---

Port opened at 19/12/2012 11:14:27

XeLL - First stage
* Attempting to wakeup all CPUs...
CPUs online: 01..
CPUs online: 3f..
* success.
* Decompressing stage 2...
* Loading ELF file...
0x00000000 0x00060ac0, Loading .text...done
0x00060ac0 0x00000814, Loading .elfldr...done
0x000612d8 0x00005cac, Loading .data...done
0x00066f84 0x00000290, Loading .got2...done
0x00067218 0x00000060, Loading .sdata...done
0x00067278 0x00009c58, Loading .rodata...done
0x00070ed0 0x000000e4, Loading .eh_frame_hdr...done
0x00070fb4 0x00000584, Loading .eh_frame...done
0x00071600 0x00699578, Clearing .bss...done
0x0070ab78 0x000000b4, Clearing .sbss...done
* GO (entrypoint: 0000000000008900)
Xenos GPU ID=5841
! SFCX: Unsupported Type A-0
! config: sfcx not initialized
unknown SMC bulk msg
unknown SMC bulk msg
DVD cover state: 62
AVPACK detected: 5b
Fixing EDID header
EDID checksum is invalid, remainder is 130
Fixing EDID header
EDID checksum is invalid, remainder is 130
Fixing EDID header
EDID checksum is invalid, remainder is 130
Fixing EDID header
EDID checksum is invalid, remainder is 130
EDID invalid.
. ana disable
. ana enable
.................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ..................................................

---

So it is excatly like an old CR install just with an diffrent ECC?

So you don't use the old ECC at all anymore?

Thanks

slim with dash max 14719 --> old ecc + glitchip
slim with higher dashes --> new ecc + dgx --> obtain keys --> remove dgx, create freeboot, install glitchip

No, because whenever you recover your cpu key, you can directly create and flash the freeboot. No old ECC is needed at all. You already have the cpu key, that's the point. :)

- Read your nand 2x
- Flash proper DGX-ECC depending on your board revision
- Install DGX as per diagram
- Let it run and recover your CPUKEY
- Then remove DGX and solder any chip (be carefull that DGX requires 5V while common glitchchips require 3V3)
- Create and flash Freeboot using your nanddump and CPYKEY
- Have fun

That ECC Martic_C posted on TX forum has a different XELL revision for CORONA.