Simple 360 NAND Flasher

Visualizzazione Stampabile

27-08-12
DieFreiheitOderTod

Allegati: 1

Simple 360 NAND Flasher

In seguito alla pubblicazione di poche ore fa NandFlasher_xex , Swizzy ha preso il codice sorgente e ha pubblicato Simple 360 NAND Flasher.

Nuovo video di Simple 360 NAND Flasher v1.2:

http://www.youtube.com/watch?feature...&v=inA8iNx15vg

Citazione:

Simple 360 NAND Flasher By Swizzy
***********************************
****************
* Requirements *
****************
- A Hacked Xbox 360 (JTAG/RGH or similar)
- A nand dump to write

****************
* What it does *
****************
- It’ll flash your motherboards nand with the supplied image using rawflash v4

***********
* Credits *
***********
- cOz Thanks for all the help you constantly give me with just about everything, and thanks for rawflash! :D
- Thanks also goes to who ever it was that ported rawflash to SDK in the first place and making it open source!

[URL="http://www.homebrew-connection.org/files/xbox/nand_flasher/dl_Simple_360_NAND_Flasher.rar"]Download Simple 360 NAND Flasher[/URL]

Fonte: [URL="http://www.dekazeta.net/foro/files/file/1388-simple-360-nand-flasher/"]Dekazeta[/URL]

UPDATE:

Traduzione del tool in lingua italiana a cura del nostro utente MaX7o.

Allegato 5293

[URL="http://www.mediafire.com/?m5u55u5bmui9j9c"]DOWNLOAD Simple 360 NAND Flasher ITA[/URL]

Password: consoleopen

Citazione:

Originariamente Scritto da Swizzy

v1.1 is ready and released:

[url=http://www.youtube.com/watch?v=AEJbjox4Q6E]Simple 360 NAND Flasher v1.1 64MB Dump in Action - YouTube[/url]

[url=http://www.youtube.com/watch?v=lCB1bWV3aE0]Simple 360 NAND Flasher v1.1 512MB Dump in Action - YouTube[/url]

[url=http://www.homebrew-connection.org/simple-360-nand-flasher-v1-1-by-swizzy-dump-timer-and-log-feature-added/]Homebrew Connection » Simple 360 NAND Flasher V1.1 by Swizzy : dump, timer and log feature added[/url]

UPDATE:

Traduzione della versione 1.1 a cura di MaX7o!

Allegato 5386

[url=http://www.mediafire.com/?oe20opavqsfa80t]Simple_360_NAND_Flasher_v1.1_ita.zip[/url]

password:consoleopen

UPDATE 12/10/2012

E' uscito Simple 360 NAND Flasher v1.2 by Swizzy! :)

Changelog:

- Added: Full support for Corona v2 (4GB Corona)
- Added: Auto Detect which mode to run in (it’ll autodetect if you are running on a MMC type of machine or a RAW type [MMC type = Corona 4GB/V2, RAW = any other older machine])
- Added: Safe-Flash (Read to recovery.bin then write)
- Added: Autoshutdown after flash (it’ll tell you it’s shutting down then count down starting at 5 seconds…)
- Added: It’ll turn off your wireless controllers during flash to keep you safe (if you reconnect them they’ll be shut off again while it’s working)
- Fixed: If you accidently hit eject the app now stays running! :D
- Fixed: You no longer see the options to write if you don’t have a updflash.bin next to the app…
- Fixed: Lot’s of code cleanup, making it look nicer and easier to follow/understand :)
- Added: It’ll now also check for Spare data before writing, again it’s a safety measure, if it finds spare data while in MMC mode it’ll warn you about it and give you the option to exit… and of course the other way around for raw mode…
- Added: The above check for spare also checks for the « Magic bytes » (your Xbox 360 image should start with 0xFF4F, i’ve never seen an image that differ from this, and thus it’s an easy way for me to check that the file you give the app really is a nand…)
- Fixed: The app will now clear the line of output before it starts overwriting, this means that you’ll no longer see leftover output on screen from previous output ;) (mostly for error messages during progress output)
- Changed: The app now use a different font (it used Arial before, now it uses verdana)

** WARNING!! If you don’t let the app exit after flashing a corona v2 you will most likely end up with a machine that no longer boots untill you reflash it using a computer!! You’ve been warned… **
** Altought this version adds multipile security checks before it starts writing an image to your nand it can still be very dangerous… if you don’t know what you are doing, don’t do it! ;) **

Ringraziamo Razorbacktrack per la segnalazione.

[URL="http://www.homebrew-connection.org/files/xbox/nand_flasher/dl_Simple_360_NAND_Flasher_v1.2.rar"]DOWNLOAD Simple 360 NAND Flasher v1.2[/URL]

Fonte:
[URL="http://www.homebrew-connection.org/simple-360-nand-flasher-v1-2-by-swizzy-corona-4gb-nand-dump-and-write-support-added/"]Homebrew Connection >> Simple 360 NAND Flasher V1.2 by Swizzy : Corona 4GB nand dump and write support added[/URL]
27-08-12
slemuelx

Io ho due domande:

1) Ho ricevuto un chip Squirt ma purtroppo è già preprogrammato per Corona (comprato su Hardstore), posso riprogrammarlo, in pratica riscriverci sopra per usarlo diversamente?

2) Ho una xbox corona da 4 GB e a quanto ho capito non posso usare lo squirt pre programmato per glitcharla, con il tool di Swizzy potrei farlo invece? Posso usare lo stesso chip e riscriverlo o devo prenderne un'altro (domanda n.1)?

Grazie mille, scusate la confusione
27-08-12
zeruel85

Le domande tecniche dovresti porle nell'apposita sezione, questa è una news.

Detto questo, rispondo velocemente ai tuoi quesiti:
1) Puoi riprogrammarlo quante volte vuoi, se hai una slave board o tramite LPT cable
2) Le Corona 4GB non sono modificabili al momento, con nessun chip e con nessun tool
27-08-12
MaX7o

Allegati: 1

Allegato 5292

[url=http://www.mediafire.com/?m5u55u5bmui9j9c]Simple 360 NAND Flasher By Swizzy.zip[/url]

password:consoleopen
27-08-12
zeruel85

Aggiorno il primo post. :)
27-08-12
Swizzy

I'm working on v1.1 as we speak, adding dumping the nand aswell as flash ;)
27-08-12
zeruel85

Citazione:

Originariamente Scritto da Swizzy

I'm working on v1.1 as we speak, adding dumping the nand aswell as flash ;)

Good news. :)

Nice job as always. :)
27-08-12
Swizzy

I need to find someone with a 256MB jasper machine that is JTAG/RGH hacked for some beta testing, if you're up for it; send me a PM and i'll give you a beta build to try ;)

If i don't find someone willing to try it out for me, i'll just release it and state in the readme it's not been tested with 256MB nand's but should work...
28-08-12
Baccello

Citazione:

Originariamente Scritto da Swizzy

Swizzy: Regular Member

Si ma togliete quel Regular Member da Swizzy perché non si può vedere, non mi potete mettere a me Vip e a lui Regular :friendly_wink:

PS: non mi togliete il Vip a me! Scusate l'OT
28-08-12
feddy75

Bella questa, non ci avevo fatto caso :) comunque quoto, adesso spetta allo staff
28-08-12
kazoom

Citazione:

Originariamente Scritto da Baccello

Si ma togliete quel Regular Member da Swizzy perché non si può vedere, non mi potete mettere a me Vip e a lui Regular :friendly_wink:

PS: non mi togliete il Vip a me! Scusate l'OT

io propongo developer member .
28-08-12
Swizzy

v1.1 is ready and released:

[url=http://www.youtube.com/watch?v=AEJbjox4Q6E]Simple 360 NAND Flasher v1.1 64MB Dump in Action - YouTube[/url]

[url=http://www.youtube.com/watch?v=lCB1bWV3aE0]Simple 360 NAND Flasher v1.1 512MB Dump in Action - YouTube[/url]

[url=http://www.homebrew-connection.org/simple-360-nand-flasher-v1-1-by-swizzy-dump-timer-and-log-feature-added/]Homebrew Connection » Simple 360 NAND Flasher V1.1 by Swizzy : dump, timer and log feature added[/url]
28-08-12
guerrierodipace

Thanks :-)

inviato dal mio...
01-09-12
MaX7o

Allegati: 1

Allegato 5386

[url=http://www.mediafire.com/?oe20opavqsfa80t]Simple_360_NAND_Flasher_v1.1_ita.zip[/url]

password:consoleopen

:surprise:
01-09-12
jonblu

grazie,bravo max! e grande swizzy
01-09-12
zeruel85

Citazione:

Originariamente Scritto da MaX7o

Allegato 5386

[url=http://www.mediafire.com/?oe20opavqsfa80t]Simple_360_NAND_Flasher_v1.1_ita.zip[/url]

password:consoleopen

:surprise:

Spostato nel primo post, grazie come sempre. :)
08-09-12
MaX7o

Allegati: 1

[url=http://www.mediafire.com/?6s4k83mw8gyj2d6]Simple NAND Flasher.zip[/url]

Allegato 5532
09-09-12
D@rio

Citazione:

Originariamente Scritto da MaX7o

[url=http://www.mediafire.com/?6s4k83mw8gyj2d6]Simple NAND Flasher.zip[/url]

Allegato 5532

dove devo piazzare questi files per farli apparire dentro FSD?
09-09-12
MaX7o

abilita http server su freestyle spunta anche senza password poi collegati dal browser http:/192.168.X.XX vai su hombrew programmi selezioni le tue immagini il testo e salvi.
09-09-12
D@rio

non ho capito però in quale cartella, nella stessa dove è presente il default.xex?
10-09-12
Essereumano

Citazione:

Originariamente Scritto da Swizzy

I need to find someone with a 256MB jasper machine that is JTAG/RGH hacked for some beta testing, if you're up for it; send me a PM and i'll give you a beta build to try ;)

If i don't find someone willing to try it out for me, i'll just release it and state in the readme it's not been tested with 256MB nand's but should work...

Flash on Jasper 256MB, all ok!!!
12-10-12
zeruel85

Aggiornato il primo post!

Nuovo Simple 360 NAND Flasher v1.2 by Swizzy! :)

Il changelog, il download e quant'altro li potete trovare nel primo post! :)
18-10-12
night_cervant

scusate ragazzi vorrei fare il backup della mia nand (x360 slim 4gb Mobo Corona con RGH) una volta avviato il tool che tasto devo premere per far il backup della nand? Non vorrei combinare casini :(
18-10-12
zeruel85

Se guardi il video nel primo post, noterai che per dumpare la nand si usa il tasto X.
18-10-12
night_cervant

si il video l'ho guardato ma volevo esser sicuro prima di far qualcosa e per evitare di combinar guai... Un ultima domanda la posizione dove salvare il dump lo scelgo io oppure va in auto in un percorso pre stabilito?
18-10-12
zeruel85

Non lo so perché non lo ho mai usato, ma credo te lo metta nella stessa cartella dell'eseguibile per far partire Simple 360 NAND Flasher. Fai una prova, tanto finché fai Dump non succede niente, viene letto solamente il contenuto della tua nand, senza scrivere né modificare nulla.
18-10-12
night_cervant

ok ho caricato il tool nel HDD da 500gb e ci son 60gb liberi, provo nel pomeriggio e vi faccio sapere :D
18-10-12
zeruel85

Il dump è di 48MB, credo che 60GB liberi bastino. :D
19-10-12
X-ray

ma sulle Corona 4Gb mi da l'opzione di fare solo il dump...poi x scrivere serve x forza il programmatore...sul changelog leggo FULL SUPPORT 4Gb, mi sono perso qualcosa???

EDIT: bisogna aggiungere il file da scrivere nella cartella del programma rinomitato updflash.bin

tnks Zeruel85 x la dritta
19-10-12
Swizzy

Citazione:

Originariamente Scritto da X-ray

ma sulle Corona 4Gb mi da l'opzione di fare solo il dump...poi x scrivere serve x forza il programmatore...sul changelog leggo FULL SUPPORT 4Gb, mi sono perso qualcosa???

EDIT: bisogna aggiungere il file da scrivere nella cartella del programma rinomitato updflash.bin

tnks Zeruel85 x la dritta

Yeah, i added a check for the file before it even give you the option, it says so in the readme to... but i guess nobody really reads it anymore... they just want it to work with any configuration, and it's not like it's pretty obvious the file name should be something like "updflash.bin" etheir, since that's the commonly used name... idk... maybe it's just me that feel it comes natural to A) Read the readme file if you have problems/don't understand how to use a certain function or B) Use your brain and think about things such as names for files... (no i'm not calling YOU stupid, just ranting about the general public that seem to be less and less able to think...)
19-10-12
zeruel85

R: Simple 360 NAND Flasher

You are right. In the last period, there is a constant amount of noob people that can't use their brain and want all the possible things without spending a few time to read an easy file instruction. Your tool is very clear and straight simple, you shouldn't have regrets about it. :)

Inviato dal mio GT-I8150 con Tapatalk 2
19-10-12
Swizzy

Citazione:

Originariamente Scritto da zeruel85

You are right. In the last period, there is a constant amount of noob people that can't use their brain and want all the possible things without spending a few time to read an easy file instruction. Your tool is very clear and straight simple, you shouldn't have regrets about it. :)

Inviato dal mio GT-I8150 con Tapatalk 2

Sometimes it feels like i make the tools way too simple... but i guess that's the life of a good developer :)
19-10-12
zeruel85

R: Simple 360 NAND Flasher

What about your xeBuild GUI v3? Do you have some news to give us? :)

Oh, and will your x360 update toolbox be updated with the possibility to download the latest dashboard? I always use it and it's very useful. :)

Inviato dal mio GT-I8150 con Tapatalk 2
19-10-12
Swizzy

Citazione:

Originariamente Scritto da zeruel85

What about your xeBuild GUI v3? Do you have some news to give us? :)

Oh, and will your x360 update toolbox be updated with the possibility to download the latest dashboard? I always use it and it's very useful. :)

Inviato dal mio GT-I8150 con Tapatalk 2

xeBuild GUI v3 is going forward... it's taking a bit of time because i'm re-writing all of it and improving all aspects of it, it's right now ALOT faster with loading nand, it's also ALOT easier to use (no more fancy options in simple mode, just basics and it's also fully automatic for ECC generation, it also creates these without python ;)) another reason it's taking time is because i've had some personal issues to deal with... it's mostly fine now tho ;)

Yes, i'll be updating x360 Update Toolbox xml's soon ennuf ;) 16197 isn't fully public yet, and the files i have are to be considerd BETA therefor i don't want to add them to the list just yet ;)
19-10-12
zeruel85

R: Simple 360 NAND Flasher

I know you were developing it from scratch, I had read something about it sometimes ago. Good work, I really apreciate your job!

Yes, it's not fully publicated right now, you are right to wait for the official new release. Stability and reliability come first. :)

Inviato dal mio GT-I8150 con Tapatalk 2
19-10-12
kairoscrazia

Simple 360 NAND Flasher is an amazing tool! I've started with Flash360 by Redline99, then Nand_Flasher_360 by tracy, after with rawflash by c0z and now I'm stick with this amazing piece of tool.

Thanks Swizzy!

I've got only a questions, the program seems to me slower than Nand_Flasher_360 and also than Flash360 by Redline99, is it possible or is just my immagination?

Thanks for all urs works!
19-10-12
Swizzy

Citazione:

Originariamente Scritto da kairoscrazia

Simple 360 NAND Flasher is an amazing tool! I've started with Flash360 by Redline99, then Nand_Flasher_360 by tracy, after with rawflash by c0z and now I'm stick with this amazing piece of tool.

Thanks Swizzy!

I've got only a questions, the program seems to me slower than Nand_Flasher_360 and also than Flash360 by Redline99, is it possible or is just my immagination?

Thanks for all urs works!

It's possible that it seems slower, it also depends on where you run it from, if you run it from internal HDD you'll read/write your nand in around 12 seconds, that's pretty fast... i could make it run even faster for raw nand machines by not outputing every block beeing processed, maybe outputting every 5-10 blocks would speed it up quite alot ;)
19-10-12
kairoscrazia

Citazione:

Originariamente Scritto da Swizzy

It's possible that it seems slower, it also depends on where you run it from, if you run it from internal HDD you'll read/write your nand in around 12 seconds, that's pretty fast... i could make it run even faster for raw nand machines by not outputing every block beeing processed, maybe outputting every 5-10 blocks would speed it up quite alot ;)

All the time that I've flashed my xbox I've used the same usb pen in the same usb port on my console :) but it's not a big problem, it's fine to me and i really appricite your work. I remember the time when I first hooked up the lpt nand reader on my jtag, that's was what actually I can clearly call "slow" :)