Visualizzazione Stampabile
-
Allegati: 1
Simple 360 NAND Flasher
In seguito alla pubblicazione di poche ore fa NandFlasher_xex , Swizzy ha preso il codice sorgente e ha pubblicato Simple 360 NAND Flasher.
Nuovo video di Simple 360 NAND Flasher v1.2:
http://www.youtube.com/watch?feature...&v=inA8iNx15vg
Citazione:
Simple 360 NAND Flasher By Swizzy
***********************************
****************
* Requirements *
****************
- A Hacked Xbox 360 (JTAG/RGH or similar)
- A nand dump to write
****************
* What it does *
****************
- It’ll flash your motherboards nand with the supplied image using rawflash v4
***********
* Credits *
***********
- cOz Thanks for all the help you constantly give me with just about everything, and thanks for rawflash! :D
- Thanks also goes to who ever it was that ported rawflash to SDK in the first place and making it open source!
Download Simple 360 NAND Flasher
Fonte: Dekazeta
UPDATE:
Traduzione del tool in lingua italiana a cura del nostro utente MaX7o.
Allegato 5293
DOWNLOAD Simple 360 NAND Flasher ITA
Password: consoleopen
Citazione:
Originariamente Scritto da
Swizzy
UPDATE:
Traduzione della versione 1.1 a cura di MaX7o!
Allegato 5386
Simple_360_NAND_Flasher_v1.1_ita.zip
password:consoleopen
UPDATE 12/10/2012
E' uscito Simple 360 NAND Flasher v1.2 by Swizzy! :)
Changelog:
- Added: Full support for Corona v2 (4GB Corona)
- Added: Auto Detect which mode to run in (it’ll autodetect if you are running on a MMC type of machine or a RAW type [MMC type = Corona 4GB/V2, RAW = any other older machine])
- Added: Safe-Flash (Read to recovery.bin then write)
- Added: Autoshutdown after flash (it’ll tell you it’s shutting down then count down starting at 5 seconds…)
- Added: It’ll turn off your wireless controllers during flash to keep you safe (if you reconnect them they’ll be shut off again while it’s working)
- Fixed: If you accidently hit eject the app now stays running! :D
- Fixed: You no longer see the options to write if you don’t have a updflash.bin next to the app…
- Fixed: Lot’s of code cleanup, making it look nicer and easier to follow/understand :)
- Added: It’ll now also check for Spare data before writing, again it’s a safety measure, if it finds spare data while in MMC mode it’ll warn you about it and give you the option to exit… and of course the other way around for raw mode…
- Added: The above check for spare also checks for the « Magic bytes » (your Xbox 360 image should start with 0xFF4F, i’ve never seen an image that differ from this, and thus it’s an easy way for me to check that the file you give the app really is a nand…)
- Fixed: The app will now clear the line of output before it starts overwriting, this means that you’ll no longer see leftover output on screen from previous output ;) (mostly for error messages during progress output)
- Changed: The app now use a different font (it used Arial before, now it uses verdana)
** WARNING!! If you don’t let the app exit after flashing a corona v2 you will most likely end up with a machine that no longer boots untill you reflash it using a computer!! You’ve been warned… **
** Altought this version adds multipile security checks before it starts writing an image to your nand it can still be very dangerous… if you don’t know what you are doing, don’t do it! ;) **
Ringraziamo Razorbacktrack per la segnalazione.
DOWNLOAD Simple 360 NAND Flasher v1.2
Fonte:
Homebrew Connection >> Simple 360 NAND Flasher V1.2 by Swizzy : Corona 4GB nand dump and write support added
-
Io ho due domande:
1) Ho ricevuto un chip Squirt ma purtroppo è già preprogrammato per Corona (comprato su Hardstore), posso riprogrammarlo, in pratica riscriverci sopra per usarlo diversamente?
2) Ho una xbox corona da 4 GB e a quanto ho capito non posso usare lo squirt pre programmato per glitcharla, con il tool di Swizzy potrei farlo invece? Posso usare lo stesso chip e riscriverlo o devo prenderne un'altro (domanda n.1)?
Grazie mille, scusate la confusione
-
Le domande tecniche dovresti porle nell'apposita sezione, questa è una news.
Detto questo, rispondo velocemente ai tuoi quesiti:
1) Puoi riprogrammarlo quante volte vuoi, se hai una slave board o tramite LPT cable
2) Le Corona 4GB non sono modificabili al momento, con nessun chip e con nessun tool
-
Allegati: 1
-
Aggiorno il primo post. :)
-
I'm working on v1.1 as we speak, adding dumping the nand aswell as flash ;)
-
Citazione:
Originariamente Scritto da
Swizzy
I'm working on v1.1 as we speak, adding dumping the nand aswell as flash ;)
Good news. :)
Nice job as always. :)
-
I need to find someone with a 256MB jasper machine that is JTAG/RGH hacked for some beta testing, if you're up for it; send me a PM and i'll give you a beta build to try ;)
If i don't find someone willing to try it out for me, i'll just release it and state in the readme it's not been tested with 256MB nand's but should work...
-
Citazione:
Originariamente Scritto da
Swizzy
Swizzy: Regular Member
Si ma togliete quel Regular Member da Swizzy perché non si può vedere, non mi potete mettere a me Vip e a lui Regular :friendly_wink:
PS: non mi togliete il Vip a me! Scusate l'OT
-
Bella questa, non ci avevo fatto caso :) comunque quoto, adesso spetta allo staff
-
Citazione:
Originariamente Scritto da
Baccello
Si ma togliete quel Regular Member da Swizzy perché non si può vedere, non mi potete mettere a me Vip e a lui Regular :friendly_wink:
PS: non mi togliete il Vip a me! Scusate l'OT
io propongo developer member .
-
-
Thanks :-)
inviato dal mio...
-
Allegati: 1
-
grazie,bravo max! e grande swizzy
-
Citazione:
Originariamente Scritto da
MaX7o
Spostato nel primo post, grazie come sempre. :)
-
Allegati: 1
-
Citazione:
Originariamente Scritto da
MaX7o
dove devo piazzare questi files per farli apparire dentro FSD?
-
abilita http server su freestyle spunta anche senza password poi collegati dal browser http:/192.168.X.XX vai su hombrew programmi selezioni le tue immagini il testo e salvi.
-
non ho capito però in quale cartella, nella stessa dove è presente il default.xex?