[RISOLTO] WayGUI errore block
ragazzi in fase di scrittura ho questo errore da cosa dipende?
Python started with:
NANDWay.py COM3 0
NANDway v0.63 - Teensy++ 2.0 NAND Flasher for PS3/Xbox/Wii
(Orignal NORway.py by judges <judges@eEcho.com>)
(Orignal noralizer.py by Hector Martin "marcan" <hector@marcansoft.com>)
Pinging Teensy...
Available memory: 3764 bytes
Python started with:
NANDWay.py COM3 0 vwrite "C:\Users\federer\Desktop\dump nand 0.bin.new.bin"
NANDway v0.63 - Teensy++ 2.0 NAND Flasher for PS3/Xbox/Wii
(Orignal NORway.py by judges <judges@eEcho.com>)
(Orignal noralizer.py by Hector Martin "marcan" <hector@marcansoft.com>)
Pinging Teensy...
Available memory: 3764 bytes
NAND0 information:
Raw ID data: 0xec 0xf1 0x80 0x15 0x40
NAND chip manufacturer: Samsung (0xec)
NAND chip type: K9F1G08U0A (0xf1)
NAND size: 128 MB
NAND plus RAS size: 132 MB
Page size: 2048 bytes
Page plus RAS size: 2112 bytes
Block size: 131072 bytes
Block plus RAS size: 135168 bytes
RAS size: 64 bytes
Plane size: 134217728 bytes
Pages per block: 64
Number of blocks: 1024
Number of pages: 65536
Number of planes: 1
Bus width: 8-bit
Writing...
Writing 400 blocks to device (starting at offset 0)...
Device is write-protected!
Block 0 - error erasing block
Block 1 - error erasing block
Error! Block verification failed. block=0x1 page=64
Block 2 - error erasing block
Block 3 - error erasing block
Block 4 - error erasing block
Block 5 - error erasing block
Block 6 - error erasing block
Block 7 - error erasing block
Block 8 - error erasing block
