Rilasciato Gecko Firmware 1.34 per Maximus Lizard : aggiunto il supporto a LTU
Scusate se non traduco direttamente :
Citazione:
Today we have released Gecko 1.33b
Added: DG16D5S Menu , currently there is only 2 functions enabled - MTK Mode for LTU 1175+ PCB and other to allow Write the Firmware to LTU 1175+ PCB . Please read the following to avoid false expectations:
a) There is no way to enter MTK on a stock drive (yet...)
b) There is no way to Read or Write the FIRMWARE OR DVD KEY from a stock drive.
c) There is no way to fully write a stock drive (yet...)
So in the meantime you need a DVD drive with a BLANK MT1332E chip like the Team Xecuter 1175+ LTU Board, it might also work if you get a blank chip and replace the stock IC (we have tried and seems to work), please be aware that could be IC chips that are sold as BLANK and actually are just pulled out from stock boards so be smart when purchasing MT1332E IC from sellers, make your tests first.
The procedure to write the new LTU Board with Lizard is as follows:
a) Get your key.bin and c-r.bin files with RGH using Jrunner (286) or newer
b) Using Jungleflasher ; generate the LTU firmware (** read JF guide as key.bin and c-r.bin MUST be combined with LTU file) (we are working to implement this feature inside Lizard toolbox)
c) Enter on the new menu on Lizard "DG16D5S->MTK" (0800 DL disc might need be inserted before if drive is not Blank).
d) Enter the new menu on Lizard "DG16D5S->Write" and from Lizard toolbox send the File generated on step "b".
[URL="http://www.360lizard.com/website/news.php"]fonte[/URL]
update 14/02/2013
Gecko 1.34 / Toolbox 1.57 / LTU Fileset 1.0 Released
Citazione:
Gecko 1.34 / Toolbox 1.57 / LTU Fileset 1.0 Released
Plus Valentine's day Half Tray patch by Geremia
Today we have updated all the Lizard tools in order to properly generate a LTU Firmware. We have also prepared the LTU 1.0 Fileset required for this process.
In order to update your tools you have 2 ways, the EASY WAY (TBX Check Updates) or the MANUAL WAY (step by step). Use whatever you feel comfortable with. Once updated you can follow the last steps of [URL="http://360lizard.com/website/downloads/Udating_Lizard_Tools_LTU_step_by_step.pdf"]this guide [/URL]to properly generate your LTU Firmware file.
Also Big thanks to Geremia for adding a half-tray patch MTK enable for the LTU, this will save you from having to reinsert the 0800 disc to enter MTK mode the next time you want to update (note on a TX LTU Board you will still need this disc the first time as they come preflashed with c4e original LTU). We hope c4e implement such feature in the upcoming releases as a default feature.
In order to enter on MTK mode once flashed with the Geremia patch all you need is to power up your drive with half tray open (or just in "naked board" state without mechanism attached). The patch also solves a PC23 check security issue more details in the patch file content's readme file.
In case you dont want to use Toolbox to generate your LTU firmware you can just use other tools to generate your LTU firmware, then apply the [URL="http://360lizard.com/website/downloads/halftray_pc23fix.rar"]patch[/URL].
R: Rilasciato Gecko Firmware 1.33b per Maximus Lizard : aggiunto il supporto a LTU
Si infatti dice che ci vogliono vuote.. ma se esce un'aggiornamento quindi si deve sostituire di nuovo giusto?? :confused:
Inviato dal mio GT-N7000 con Tapatalk 2
R: Rilasciato Gecko Firmware 1.33b per Maximus Lizard : aggiunto il supporto a LTU
Io credo che si possano scrivere solo una volta
Inviato dal mio GT-N7000 con Tapatalk 2
R: Rilasciato Gecko Firmware 1.34 per Maximus Lizard : aggiunto il supporto a LTU
Ma l'ha aggiornato il lizard ? Se non sbaglio l'ultimo č uscito un paio di giorni fa
Inviato dal mio GT-N7000 con Tapatalk 2
R: Rilasciato Gecko Firmware 1.34 per Maximus Lizard : aggiunto il supporto a LTU
Qiello credo anche col lizard
Inviato dal mio GT-N7000 con Tapatalk 2
