Allegati: 1
[NEWS] 3k3y firmware 02.07: rilasciato!
In data 27/11/2013 il Team 3k3y rilascia un ulteriore update firmware per il loro ODE 3k3y, giungengo così alla 02.07!
Con questo nuovo update viene migliorata la funzionalità e la compatibilità del nuovo 3k3y Manager, che vi ricordo è visualizzabile, previo settaggio del hdd esterno con l'apposito software IsoTools sempre rilasciato dal Team 3k3y, direttamente dal catalogo Giochi, con un design molto accattivante, sull'onda del già noto Cobra Browser per il Cobra ODE e del recente E3 Manager del Team E3.
Changelog:
Citazione:
- Improved handling of PS3 Extra menu ISO.
- Support for PS3 4004.
- Improved handling of PS3 Extra menu ISO (logical partition).
- Removed requirement for PS3 boot disk when loading PS3 Extra menu.
- Dont eject disk when console sends stop/start cmd (308R/310R).
Istruzioni:
Citazione:
1. Extract the files "rootfs", "uImage" ,, "3key.cfg" and "gyo.db" (the fpga updates are not included in this update. If you already did the latest fpga updates from 2.02 or bought your 3k3y recently you don't need to update again. If your FPGA is not up to date please download 2.02 and use the fpga from there. Why is it left out? People are not reading and doing the wrong updates so this will filter some of them out!)
2. Open 3key.cfg with Notepad and configure it if needed. If you do not wish to change the settings on your 3k3y then you do not need to edit OR update your 3k3y with this file, leave it out!
2.1 Add the files to the root folder of a Flash Drive or HDD. (Make sure to "eject" the drive properly from the PC, it may otherwise cause corrupt files)
3. Connect the Flash drive or HDD to your 3k3y remote and wait for the 3k3y to start the update.
3.1 The remote OLED will now display "UPDATING - PLEASE WAIT" for about 35 seconds. (Do not turn off your PS3 or disconnect the remote while updating. FPGA updates will take a little longer)
4. Once the update is completed, the OLED will display "UPDATE COMPLETE - RESET" Reboot your PS3 and the 3k3y should now be updated to the latest firmware.
5. That's it! Continue to enjoy using 3k3y with the new features!
NOTE! If you use the same drive as you store content on to do the update with, then its recommended (not needed) to remove the "rootfs", "uImage" & "3key.cfg" and any other files from the root of your drive after a firmware update. Since keeping them there will cause the 3k3y to check the files if they are a newer firmware version then stored on your 3k3y micro SD card, and because of that take longer time for your HDD to be recognized.
Vi ricordo che potete caricare il file gyo.db con il database aggiornato direttamente scaricandolo dal seguente link --> [URL="http://www.3k3y.com/ird_files/gyo"]CLICCA[/URL]
Fonte:
[URL="http://k3yforums.com/viewtopic.php?f=27&t=13956"]k3y Forums >> Firmware 2.07[/URL]
